Products
Description
Minimally invasive preparation that leaves healthy tooth structure intact. The MI Stainless Burs are designed and engineered to selectively remove softened carious dentin without cutting healthy calcified dentin.
Features & Benefits:
- Corrosion Resistance - Dental burs are considered to be surgical instruments and therefore need to be properly sterilized following use. MI Stainless Burs are composed of stainless steel and can be repeatedly autoclaved without risk of corrosion.
- Cutting Performance - The blade rake angles on the MI Stainless Burs are specifically engineered to remove decalcified softened dentin.
- Blade Durability - Cutting flutes have excellent wear resistance due to the hardness of the stainless steel.
- Maximum rpm:
- 28mm: 1200rpm
- 34mm: 800rpm
The 28mm MI Stainless Burs provide length to reach difficult to access areas. The 34mm length provides enhanced bur head visibility, ideal for use with a microscope.
| Size | Bur Head Diameter |
| 1/2 | 0.6mm |
| 1 | 0.8mm |
| 2 | 1.0mm |
| 3 | 1.2mm |
| 4 | 1.4mm |
| 5 | 1.6mm |
| 6 | 1.8mm |
NOTE: Be sure not to cut excessively by using the guide of tactile sensation difference between cavity floor and side wall of cavity.
CAUTION: Before use, see the instructions as indicated below.
- For dental use only
- Sterilize before use
- Set a bur to a handpiece properly according to handpiece manufacturer's instructions.
- Before each use, run the bur in the handpiece to ensure it has not been bent from previous usage. If the bur runs off center, discard and replace with a new bur.
- Before use, remove fillings such as resin and metal completely.
- Burs should not be used above the maximum allowable rpm to avoid possibility of injury due to breakage.
- Care should be taken not to apply excessive lateral pressure during use, especially on the long neck 34mm burs.
- Eye protection should always be provided for operator and patient during use.
- Water spray coolant can be used to minimize pulpal irritation.
- Discarded burs should be treated as medical waste.
