Products
Description
Ceramir CAD/CAM Blocks are a new type of CAD/CAM material. They are manufactured using advanced patented laser sintering technology, creating a single glass phase material embedded in a hybrid matrix. This results in a block with the strength of particle infiltrated ceramics (lithium disilicate), the aesthetics comparable of feldspathic glass-ceramics, but without the brittleness of pure ceramics, and with the flexibility similar to dentin (20 GPa), which reduces tension during masticatory load and creates a shock-absorbing effect, decreasing occlusal stress.
- No additional firing required. Simply polish and cement.
- Shorter milling time results in reduced chair time.
- Kinder to the milling burs.
- Easy to adjust and repair.
| Technical Data | CERAMIR CAD/CAM BLOCK |
| Flexural Strength Biaxial | 320 MPa |
| Flexural Strength Three Point | 200 MPa |
| Compressive Strength | 550 MPa |
| Flexural Modulus | 20 GPa |
| Surface Hardness | 100 HV |
T-Blocks are highly translucent blocks that mimic the natural enamel. This universal T-Block can be color matched through cementation, which can simplify the clinical procedure leading to less inventory needed.
C-Blocks are chromatic blocks.
i-Blocks are used for precise and reliable fabrication of implant supported restorations. They fit precisely onto titanium (Ti-Base) or similar attachments so that the final restoration can be placed in the same appointment to save time and cost and to improve the patient’s experience.
All blocks are standard 12x14x18mm.
For a link to the Ceramir CAD/CAM Blocks Brochure Click here.
